Home Theater Forum and Systems banner
1 - 4 of 4 Posts
G

·
Discussion Starter · #1 ·
I recently bought a 42" Hitachi Ultrascan HD Rear Projection TV model number #43fdx01b, the TV has a red convergence problem and am looking at doing it myself, but I need to now what parts I need and where are some good places to get them from and exactly what I need to do to fix the problem. So any help would be very helpful
 

·
Plain ole user
Joined
·
11,121 Posts

·
Registered
Joined
·
9 Posts
I have a similiar problem with my 43fdx01b in that after I repaired the convergence, the tv picture was fine but there was a problem in the lower left corner. I went back in the convergence mode and while I was trying to align the grid the picture went black.
 

·
Plain ole user
Joined
·
11,121 Posts
I suggest starting a new thread for a new problem with YOUR set, describing everything with as much detail as possible.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top