Home Theater Forum and Systems banner

1 - 4 of 4 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter · #1 ·
Hello All:
I received my digital board in the mail today and installed it in my HL-R5067W. Now, I don't have any sound and no option on the screen for Component so no HD. All it has is TV in my Source List

I have a coax running from the wall into my cable box into the TV. That seems to give me an analog picture. But it does not have sound.

I also have the Green/Blue/Red component connected into my cable box and then into the back of my TV in Component1. I have the RCA Red/White plugged into my cable box in Audio out and into the back of my TV.

What else could I be missing? I am pretty sure I hooked the TV up correctly, but not sure.

Oh and as a side note, after I replaced the digital board I had to go into the service menu and V-FLIP.

Any help is greatly appreciated.

thanks
kp
 

·
Registered
Joined
·
14 Posts
Discussion Starter · #3 ·
Seems I am an idiot and don't have the correct part number: I now have a fresh BP94-02084A.. If anyone is interested let me know.
 

·
Plain ole user
Joined
·
11,121 Posts
Getting the right board for a Samsung is VERY difficult, even for an experienced tech who has access to their service web site. Even the same part numbers can have different versions. I know of no good way to deal with the problem other than to deal with a reputable supplier that is a Samsung authorized distributor and will work with you on returns.

Are you sure you made all of the connections properly?
 
1 - 4 of 4 Posts
Top