Home Theater Forum and Systems banner

1 - 7 of 7 Posts

·
Registered
Joined
·
41 Posts
Discussion Starter #1
Can someone explain to me how I am to connect the E-MU 0404 to my Receiver (Marantz 4001)? I've looked over the help notes but there are so many inputs and outputs on the 0404 that I don't know what to use. I already have the Radioshack meter on hand, but I am waiting to see what cables I need.

 

·
Registered
Joined
·
7,514 Posts
Simply use the unbalanced 1/4" TS phone jack output to the receiver and the unbalanced 1/4" TS phone jack input for the RS meter.

The soundcard cal will temporarily require a TS to TS cable for loopback.

brucek
 

·
Registered
Joined
·
41 Posts
Discussion Starter #3
Simply use the unbalanced 1/4" TS phone jack output to the receiver and the unbalanced 1/4" TS phone jack input for the RS meter.

The soundcard cal will temporarily require a TS to TS cable for loopback.

brucek

So I'd need two 1/4 to RCA right? I already have TS cables that are hooked up to my studio monitors so I could just use one of those temporarily.
 

·
Registered
Joined
·
41 Posts
Discussion Starter #7 (Edited)
Edit: Nevermind, I fixed it somehow by setting the 0404 to 96kHz on the soundcard and the windows settings and now it shows up in REW. Calibrated the soundcard, so all I need to do is pick up a couple of cables at radioshack tomorrow and measure my sub.
 
1 - 7 of 7 Posts
Top