You have too many cables involved. Connect the mic to the right channel mic-in and then connect the right channel line-out to to the powered monitors. That's it.
Before you take a measure (with the connections as outlined above), you must do a soundcard calibration to create a soundcard calibration file to save. For this test, all cables are removed except for a single line-out to line-in of the right channel. Once complete, remove this loopback cable.
I would also select the 828 in REW and not select default card.
brucek
Before you take a measure (with the connections as outlined above), you must do a soundcard calibration to create a soundcard calibration file to save. For this test, all cables are removed except for a single line-out to line-in of the right channel. Once complete, remove this loopback cable.
I would also select the 828 in REW and not select default card.
brucek
