im running a pair of BIC Acoustech PL-28II Center Speakers - off a crown xli 800 as duel centers they sound great but some times they distort iv got
the crown at gain knob at 40% is that to hi the amp sensitivity set at .775Vrms an
my outlaw audio 976 receiver has a 4volt xlr output ,an my current signal
output to the centers is at - 7db im not using the eq because iv found that
almost everythinng sound great without it ,, that being said every once an while i get some distortion at 5000khz an 7000khz , i am wondering if
upgrading to the crown xls 1002 an using the lowpass or bandpass filter options
would help
any advice let me know
please forgive if i sound like a noob
the crown at gain knob at 40% is that to hi the amp sensitivity set at .775Vrms an
my outlaw audio 976 receiver has a 4volt xlr output ,an my current signal
output to the centers is at - 7db im not using the eq because iv found that
almost everythinng sound great without it ,, that being said every once an while i get some distortion at 5000khz an 7000khz , i am wondering if
upgrading to the crown xls 1002 an using the lowpass or bandpass filter options
would help
any advice let me know
please forgive if i sound like a noob