Home Theater Forum and Systems banner

1 - 3 of 3 Posts

·
Registered
Joined
·
263 Posts
Discussion Starter · #1 ·
I have a (probably) stupid question:

HOW the hell do I measure my CC, SR and SL with REW when I want to measure what Audyssey did? I know how to measure it WITHOUT audyssey: just plug in the speaker cable of eg. the CC in the FR speaker output of my amplifier and make a measurement. But with Audyssey all the pre-outs of my Onkyo TX-SR876 (which I use as a processor only because I have a separate amplifier) have different 'Audyssey equalized outputs' right? So measuring the FR and FL separate is no problem (just switch the right output of my Tascam MKII/right aux. input on Onkyo TO left output of my TascamMKII/left input of my AVR) but how to measure the CC,SR and SL.......
 

·
Registered
Joined
·
263 Posts
Discussion Starter · #3 ·
Is there a “7-channel stereo” setting, or something similar? If so you could unplug all the speakers except the one you want to measure.

Regards,
Wayne
Yes, I have a 'ALL CHANNEL STEREO' setting but with this setting the CC channel does not get the 'equalized/audyssey' signal from the CC pre-out does it? I also have a 'MONO' mode, maybe I can do something with that?
 
1 - 3 of 3 Posts
Top