Home Theater Forum and Systems banner

I don't think I'm doing it right.

1086 Views 4 Replies 3 Participants Last post by  Danothemano
Can someone help me...again? Right now I've got my SPL meter hooked up to the Front Left Hi-Z/Line plug on my E-MU 0404 using a RCA to 1/4", and a RCA to 1/4" going to the VCR input on my receiver. Here's what I've gotten.
1 - 1 of 5 Posts
Can someone help me...again?
There's no real problem.

You should set the measure screen to sweep from 0Hz to 200Hz for a sub (not 15-80).

The graph axis of the plot should be vertical = 45dB -105dB and horizontal = 15Hz - 200Hz.

Be sure that the level isn't so high as to clip (note your RMS is a 0dB).

1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.