Lab gruppen ipd 2400

1 - 1 of 1 Posts

MattSPL

Registered

Joined Apr 1, 2011

56 Posts

Discussion Starter • #1 • Sep 2, 2018

Has anybody any experience with the ipd2400, particularly with subwoofers?
It states 2 x 1200w @ 4ohms and I think I read response down to 2hz.

I’d like to know will it perform as well as an inuke6000 as I know behringer specs are inflated.
And are the fans quiet?

Thanks
Matt

1 - 1 of 1 Posts

Join the discussion

Recommended Reading

Fi car audio ht3 amp?

Subwoofer Amps | High Pass Filters

I'm looking to build 2 sealed enclosures with the Fi audio HT3. About 6^3 foot boxes haven't decided on which ohms to go with yet 2 or 4. Having a hard time finding an amp to run these. I'm in Canada. 90%movies 10%music Was looking at a crown but a lot of people say they are terrible for subs...
- 0
- 451
- K
  Kreutz · updated 5 months ago
Clean Box Pro newbie issue

Subwoofer Amps | High Pass Filters

Please be gentle as I am not a sound guy. I do photography and video. Shooting video at a pageant and wanted to connect to the sound board using the Clean Box Pro. We are connecting 1 XLR unbalanced line in to the CBP from the snake from the soundboard and then tried both the 1/8" to 1/8" on the...
- 1
- 258
- S
  Shuttrbug · updated 6 months ago
Powering sealed JL 13w7 EP2500 or XLS 2502

Subwoofer Amps | High Pass Filters

So I plan on building a sealed JL 13w7 with EQ to hit 20hz flat, to power that little beast I was wondering if I should get an Behringer EP2500 or a Crown XLS 2502. Personally I'd like to go with the Crown, better efficiency + no need of mods for silence, but I wonder if it can handle the task...
- 11
- 2K
- upking · updated 8 months ago
Behringer iNUKE1000DSP Interconnect cable

Subwoofer Amps | High Pass Filters

Hi, I would much appreciate to confirm what is the proper interconnect cable for the Behringer iNUKE 1000DSP? Currently I am using the following XLR to RCA cable...
- 4
- 709
- mtavares · updated Jun 6, 2018
Need a replacement amp

Subwoofer Amps | High Pass Filters

Well it’s been awhile and I’ve finally moved into a house with a basement. My old set up was using a behringer EP2500 but one of the channels went bad. I was also pairing it up with a behringer ultra gain pro for Hi/Lo pass filters. Was looking at Inuke 3000dsp, but I had a couple of questions...
- 2
- 822
- D
  Deezer · updated May 2, 2018