Home Theater Forum and Systems banner

Laserdisc Pioneer cld-v2600 issue

1678 Views 4 Replies 3 Participants Last post by  typ44q
I was given a pioneer cld-v2600 and some laserdisc's from a friend. I hooked it up to my TV using the RCA cables and loaded a disc in. Everything loads and the disc plays and i get great audio but no video output. Tried different cables and connections but still no video. Any ideas on what could be up with it?
1 - 5 of 5 Posts
No video output at all or do you see any menu screens before the disk plays.
I see no video output what so ever.
Does your TV have a "yellow" composite input or are you hooking it up to the "Green" of a component input? If the later, you may need to change the setup in your TV. If you have a SVideo output and tv input...try that. I assume you have tried changing cables.
Do you have a different TV that you could test it on?
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.