Home Theater Forum and Systems banner
1 - 9 of 9 Posts

· Premium Member
Joined
·
5,868 Posts
Do you have the WinISD file?

I will upload a simulation later on.
 

· Registered
Joined
·
1,747 Posts
Hello fellow shacksters, has anybody tried modeling the Mach 5 Audio FTW-LTE? I am on deployment and my laptop crapped out on me. So if anybody can model the FTW-LTE for me, I just want to see how it simulates in a sealed enclosure. Thanks.
I was modelling this the other day. You're looking at around 25 cu ft sealed minimum, preferably even more. The smaller you go from there, the more EQ and doublings of power you're going to need to pack on.

IMO this driver is best suited for infinite baffle application.
 

· Premium Member
Joined
·
5,868 Posts
Of coarse it can but you need a LOT of EQ or you need a LOT of space to get a nice flat response. There are other variables also but these are the two main ones of the top of my head and short answer.
 

· Registered
Joined
·
286 Posts
Can this driver work in a ported box say tuned to 12HZ?
I was thinking about maybe going 25 cubic foot box tuned to 13HZ and my wife said she was fine with it. How does that model?
Yes, with a modest +6 dB room gain down low it looks good in 32/25 ft^3 net_12/13 Hz alignment.

GM
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top