Home Theater Forum and Systems banner

1 - 16 of 16 Posts

·
Premium Member
Joined
·
6,711 Posts
Best to point the mic straight up. Measurement looks fine but best using the standard graph scalings to see it in context - 15 to 200Hz and 45 to 105dB, use the graph limits button in REW (right hand side of the toolbar, 2nd from right) to set the scales.
 

·
Registered
Joined
·
52 Posts
Discussion Starter #4
Gotcha on the graph. Any suggestions on the peak between 30 & 40 hz? I have two Peerless XL12's with passive radiators. As seen in the pic. Tommy
 

·
Registered
Joined
·
52 Posts
Discussion Starter #9
The image is too big. How do I down size from 2048x1536 to 1000x1200? For the mean time each sub is under the left and right front mains.
 

·
Registered
Joined
·
3,251 Posts
The image is too big. How do I down size from 2048x1536 to 1000x1200? For the mean time each sub is under the left and right front mains.
I'm not a computer geek ...what I always do is open the picture with paint and then re-size it, I'm sure it can be done with other programs; maybe you can post what you have in your computer and I'm sure somebody will guide you through :yes:
 

·
Registered
Joined
·
3,251 Posts
Any suggestions on the peak between 30 & 40 hz? I have two Peerless XL12's with passive radiators.
You need to repost the graph with the correct scale (45db-105db and 15Hz-200Hz) ...it will look different and you'll see exactly what dip/peaks you really have :yes:
 
1 - 16 of 16 Posts
Top