Home Theater Forum and Systems banner

Mission: Trio12 Sub (design/build)

25575 Views 54 Replies 19 Participants Last post by  Bengoshi2000
Today I submitted my order for the Quartet12/Trio12 kit. I've taken the suggested design and modified it a bit. Here are two pics from Sketchup:

The PR's will be covered with a cloth wrapped speaker grille... I'm thinking of using some of the "vintage" cloth that's available at PE (and elsewhere on the net).

I'm hoping to start the build in early November... pics are forthcoming.
See less See more
1 - 2 of 55 Posts
While the Bash amp can be open to the inside of the enclosure, you have to keep any poly-fill or similar materials away from touching the circuit boards and heat sinks as it will cause over-heating.

Bill C
Or fire....as I experienced in the past

See less See more
your side slat detail work is very nice! really brings it together.
I was going to say the same thing! I'm excited to hear how it turns out.
1 - 2 of 55 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.