Home Theater Forum and Systems banner

Mission: Trio12 Sub (design/build)

25567 Views 54 Replies 19 Participants Last post by  Bengoshi2000
Today I submitted my order for the Quartet12/Trio12 kit. I've taken the suggested design and modified it a bit. Here are two pics from Sketchup:

The PR's will be covered with a cloth wrapped speaker grille... I'm thinking of using some of the "vintage" cloth that's available at PE (and elsewhere on the net).

I'm hoping to start the build in early November... pics are forthcoming.
See less See more
1 - 7 of 55 Posts
Egg crate foam is not an absolute necessity. Some say it works to dampen the back wave of the sub, some say it doesn't. Try it without and see how the sub sounds. You can always add polyfill batting later.
Looks good. I strongly suggest you apply glue to the perimeter of the T-nuts. You don't want to have any trouble with them after your components are installed.
1 - 7 of 55 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.