Home Theater Forum and Systems banner
1 - 1 of 11 Posts

· Moderator Emeritus
3,772 Posts
Hi chrisusvi,

I'm thinking that Marshall is correct in that the video problem is either a setting mismatch between PC and PJ or an incompatibility. If possible, I would try selecting a video mode that is an exact match for the PJ and make sure it is being used through the VGA port when the PJ is hooked up.

You might also try an alternative video output such as component or S-video if possible just for troubleshooting.

Make sure you have read, and are following, the detailed procedure on viewing computer images on pages 20-22 of your PJ manual. Below is a link to an on-line PDF version. For example, the power to the PJ must be turned on before the PC.


You might also try downloading the latest driver for the Radeon 9000/9100 IGP and see if that helps. I found a problem with it and Myth TV under Linux - "TV-Out is only synchronized correctly in terminal-mode and therefore not of much use with MythTV", but this may have nothing to do with you.
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.