Home Theater Forum and Systems banner
1 - 5 of 5 Posts

·
Registered
Joined
·
2,604 Posts
Assuimng you're not a spammer, feel free to go to our post-padding thread to get yourself up to 5 (system sometimes takes up to an hour to update once yuo've done this). :T
 

·
Registered
Joined
·
2,604 Posts
Well, the dark detailer sounds like a dynamic iris, which most calibrators would turn off for calibration, and would suggest leaving off for an accurate picture. That being said, many agree that users can turn it back on to a low setting if they choose to achieve blacker blacks, but caution to look closely at what it's doing to the images to decide whether it's worth it.
The last one sounds like a contrast-enhancing feature, again most calibrators would say turn it off and leave it off. Modern TVs are full of these extra features that sound good but ultimately result in a less accurate picture.
the middle one sounds like an advanced 3D CMS, useful for a calibrator to really dial in the color gamut... IF it operates properly, which many of them don't. And it's something that shouldn't be touched by those without accurate measuring instruments and knowledge of how to use them and the controls.
Unfortunately I have very little experience with Mits sets, and none recent to give you better info.
 

·
Registered
Joined
·
2,604 Posts
Keep in mind, the color controls will be very useful for cal if you get instrumentatoin to use them right.
DVE BD is a very reputable bluray for patterns, both basic and grayscale, and instructions on how ot use the basic ones (visually). There's a THX Optimizer on all THX Certified discs, but that won't get you quite as far. You can search the stickies here... I think Len listed a bunch of other resources, but DVEBD is the one I've used most. I'm not sure if it has the patterns for using those color controls, but I know the THX doesn't.
 

·
Registered
Joined
·
2,604 Posts
I was deciding between the 65737 and the 65837 about 6 months ago. The consensus at the time was that it was worth it to get the 837 mainly for the better blacks it provides. So, I bought the 65837. I've since then also purchased the 60C9 (clone of the 737). If I have them side by side, I can see a slight difference in black level, but IMO it's not worth the extra money, and if I had to do it over again, I would have purchased the 65737
Just out of curiosity, did you calibrate either of them?
 

·
Registered
Joined
·
2,604 Posts
Not professionally, but they've both been calibrated with DVE-BD
So it's a semi-fair comparison :T
did the DVE-BD improve the picture drastically, or only to the degree that someone with a trained eye would notice?
I've only had one person tell me they couldn't see the difference in sets after I've adjusted just using DVE, and that's my cousin who's had vision problems his whole life.

I've never calibrated a TV before, but should probably look into it.
If you think you want to hire a pro, go for it. If you think you want to learn to do it yourself, go for it, but be prepared, to do anything beyond the 5 basic settings can be (for some) a long steep learning curve, as well as an investment in equipment. If you're like me, the learning experience is well worth the sweat equity, or even if you're not like me but like to tweak and tweak and tweak... but if you're only going to do it once, it's probably not worth the ROI to DIY, depending on how much your time is worth to you.
 
1 - 5 of 5 Posts
Top