Home Theater Forum and Systems banner

1 - 5 of 5 Posts
E

·
Guest
Joined
·
0 Posts
Discussion Starter #1
Hello all,

I have a buddy who is constructing an outside bar/kitchen area. In addition to that he is asking about installing a projector on the back patio, and projecting towards the bar.

My question is, are there any units on the market that will all ow the screen to come up out of the bar? I've seen many units that come down from the ceiling, but this is an unusual case. I have not been able to look, but I'm also very new to all of this.

There has to be a way to make this happen.

Thanks for your help.
 

·
Premium Member
Joined
·
5,288 Posts
Oh yeah. Units like this are made for things like end of a bed, around a railing at the edge of a room, etc. Check with Chief Mounts.

Bryan
 

·
Registered
Joined
·
2,234 Posts
... There has to be a way to make this happen...

Thanks for your help.
Hiya EchoMike and welcome to the Shack.

Sorry about not getting back to you on this, but yeah as you said there has to be a way to make this happen, and I do know of someone that did a setup like this.

They had to design it and build it themselves, so were you looking for something pre made, or are you handy with building things yourself?

In the meantime I'll look around to see if I can find who makes a unit like this, I know they are out there. I'll also see if I can get a list of materials the person used to make one, but if I remember correctly, it took them a long time to engineer it to get it to work the way they wanted it to. (As in almost a year... but that was also something being built for the first time).

Anyway, I'll look around and I am sure others will too. :)

Welcome aboard!
 
E

·
Guest
Joined
·
0 Posts
Discussion Starter #5
Thanks alot guys!!!! I really aprreciate all the help, and advice. Actually, I was given the wrong information. The situation will be reveresed. Screen will be "in" the patio that has a ceiling so we are going to flush mount a nice ceiling unit hopefully. Now we just have to find the right projector, and then calculate out the viewing area, but I'll open that as a seperate post.

If you can get the design for that unti that would be a cool thing to have though
 
1 - 5 of 5 Posts
Top