Home Theater Forum and Systems banner
1 - 1 of 1 Posts

·
Registered
Joined
·
5 Posts
Wow. A $7500 speaker?

http://www.vintageking.com/ATC-Loudspeakers-SCM25A-Pro-Pair

The SCM25A Pro incorporates ATC's proprietary short coil seven-inch carbon-paper woofer, a three-inch soft dome midrange driver and a one-inch silk dome tweeter in a ported enclosure that measures 10.4 inches (264 mm) (H) x 16.9 inches (430 mm) (W) x 16 inches (408 mm) (D). The integrated tri-amplifier generates 150 W RMS for the woofer, 50 W RMS for the midrange and 25 W RMS for the tweeter. The passively cooled amp pack also features FET limiting. The crossovers are all 4th order, critically damped with phase compensation.

Did you want to use this for home theater, music, both? What size room? It is going to take a TON of work to DIY something like this. Have you reviewed the hundreds, possibly thousands of well documented DIY speakers designs here and on other sites that would likely exceed your needs with no guessing required? Only tools, patience, XO parts, and different drivers?
 
1 - 1 of 1 Posts
Top