Home Theater Forum and Systems banner
1 - 2 of 2 Posts

· Banned
Joined
·
4,554 Posts
Discussion Starter · #1 ·
I have a BD 390 blu ray player hooked up to an older (3 years old) Pioneer receiver via 7.1 Multichannel inputs (I have a VSX-1016). My Pioneer receiver does not have an HDMI audio input... and I opted to connect the blu ray player via the multichannel inputs because the BD player has on-board DTS-HD, etc. decoding built-in (my pioneer does not have the ability to decode those HD tracks).

What I didn't realize is that the multi-channel inputs bypass the speaker settings I have on the amp.

I have tried running the sound from my BD player to my amp using an optical cable. I understand that this does not allow for DTS-HD to be used... but I've found there to be some lip-sync issues when I do that. Also, I've noticed that my sub (hooked up to my receiver via LFE cable) behaves differently when the BD player is decoding the audio and passing it to my amp via multi-channel 7.1 hook ups. What happens is that the sub is less active and only plays the lower lows (and not the mid range lows that come out of it when I switch the audio input to optical cable).

So, I've been considering getting a new amp. I've been interested in the new Elite VSX-21THX. It has the DTS-HD decoding on-board (obviously) and also has HDMI audio and video inputs. My assumption, all along, is that a new receiver connected to my blu ray player via HDMI will allow me to receive an audio signal from the blu-ray player that is equal to the current multi-channel set-up I have now, but will also allow the new receiver to all the decoding WHILE taking advantage of things such as bass management and my amps speaker settings. I'd also like to be able to bring in audio from the BD player that isn't 7.1 (say, a 5.1 track) and allow the receiver to turn it into 7.1.

My question is this, though: I've read one of the knocks on the VSX-21THX is that it only has 5.1 Multi-Channel inputs and not 7.1. Why would this matter???? Isn't the best option to have the audio coming out of your BD player via HDMI anyway? So why would anyone care about only having 5.1 multi-channel inputs.

Outside of arguing over receiver models, etc., I'm hoping someone with some more experience might be able to confirm or dispell my assumptions (above) and help me understand my options.

Thank you all and happy thanksgiving.
 

· Banned
Joined
·
4,554 Posts
Discussion Starter · #4 ·
I currently have a 7.1 set-up...

I'm not all that psyched about the multi-in's bypassing my settings in the AVR. Kind of defeats the purpose... doesn't it?

Anyhow... not sure if I would ever need multi-channel in's in the future (that is, of course, until something new comes along that the receiver can't decode....)
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top