[nordr]

I am using a macbook and the internal sound card for calibration. I have the settings as indicated in the macbook primer post. I am running a stereo cable from the line out to line in. I don't have any Y connecters of anything just the one cord going from in to out.

Below is the calibration file.

I thought this looked ok. So to check I ran a 0-20000hz measurement and got this...

That's not right, right?

 

[nordr]

Also just ran the first measurement. Not sure if it is valid considering the soundcard configuration. But this is what I got using the RS meter with the cal file loaded.

 

[nordr]

Ok, thanks. Moving on...

Could a BFD fix that huge dip around 56hz? Seems like I am getting almost no sound there. I'm guessing that the hump between 70-100hz can be fixed. Also going to try to move the sub around some but I have very limited options.

The sub is from a HTIB it is JBL 10' 150W. It's going to be the next thing I will upgrade but in the meantime I was going to fill in the gaps with a BFD. Looking at my graph, do you think I am a good candidate for this?