Yes, the sub was swithed-off. I'm trying to determine the correct cross-over cut point monitoring the main speaker without the sub. But I can't
Newbie with REW, quite odd result
Hi guys
I'm using Rew since a couple of days. I've a Velleman Avm2050 and a Audyssey Mic
the graph below is taken with a Audyssey Mic setup. no problem with my Realtek 887 . I calibrated it without any issue and I've the related cal file
I got this kind of odd result
the red line is the 20-200 Hz , 1M lenght test with Marantz Sr5009. No EQ , large speakers (no cross-over)
the blue line is the 20-200 Hz , 1M lenght test with Marantz Sr5009. No EQ , small speakers (cross-over 80)
the blue line is the 20-200 Hz , 1M lenght test with Marantz Sr5009. No EQ , small speakers (cross-over 250)
front speaker are 70 hz. -3 db as reference frequency response
the sub is OFF
Image hosted for free at CtrlV.in
where are the cross-over cuts?
onder:
PS: the cross-over works, my ear hear the difference
I'm using Rew since a couple of days. I've a Velleman Avm2050 and a Audyssey Mic
the graph below is taken with a Audyssey Mic setup. no problem with my Realtek 887 . I calibrated it without any issue and I've the related cal file
I got this kind of odd result
the red line is the 20-200 Hz , 1M lenght test with Marantz Sr5009. No EQ , large speakers (no cross-over)
the blue line is the 20-200 Hz , 1M lenght test with Marantz Sr5009. No EQ , small speakers (cross-over 80)
the blue line is the 20-200 Hz , 1M lenght test with Marantz Sr5009. No EQ , small speakers (cross-over 250)
front speaker are 70 hz. -3 db as reference frequency response
the sub is OFF
Image hosted for free at CtrlV.inwhere are the cross-over cuts?
onder:PS: the cross-over works, my ear hear the difference
Attachments
1 - 5 of 8 Posts
New test with the Velleman avm2050 on the front speaker (the sub is powered-off)
I don't understand the values on axixs.
the cross-overs are working because they are changing the initial point of the high-pass filter but the values on the axixs seems totally broken. The highest one (120 HZ) start on almost 55 HZ not 120 HZ (the blue line)
Image hosted for free at CtrlV.in
I don't understand the values on axixs.
the cross-overs are working because they are changing the initial point of the high-pass filter but the values on the axixs seems totally broken. The highest one (120 HZ) start on almost 55 HZ not 120 HZ (the blue line)
Image hosted for free at CtrlV.in
2
Ok
yes, there is a problem with the spl meter (velleman avm2050).
the difference is -0.3 Db
I have to investigate of mic/spl meter.
Image hosted for free at CtrlV.in
Image hosted for free at CtrlV.in
Is it a problem if I''m using the line-in (right) of the sound card and the mono from the Spl meter and the Hdmi device as the output (stereo) ?
yes, there is a problem with the spl meter (velleman avm2050).
the difference is -0.3 Db
I have to investigate of mic/spl meter.
Image hosted for free at CtrlV.inImage hosted for free at CtrlV.inIs it a problem if I''m using the line-in (right) of the sound card and the mono from the Spl meter and the Hdmi device as the output (stereo) ?
1 - 5 of 8 Posts
