Home Theater Forum and Systems banner
1 - 4 of 4 Posts

· Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
I was given a Philips 46pp930217 for free. The tv had bad coolant and a convergence problem. The tv is only 5 yrs old so I decided to put the work and parts in. I did the all the repairs, including soldering all the pins in the stk IC. Problem is now no letting will show up on the screen. I dont see any subtitles and the menu will not come up so I can reset the convergence. Can anyone give me a little direction.
 

· Registered
Joined
·
4 Posts
Discussion Starter · #5 ·
You were right one of the plugs was not seated all the way. I put it all the way down and now I have lettering. Problem is now my convergence is worse. I believe there is already multiple topics about that prob so I will take a look around before I start asking.
 

· Registered
Joined
·
4 Posts
Discussion Starter · #6 ·
I got the writing back but now I dont have the crosshairs for the manual convergence. I checked every plug and they are all seated, I also checked the solder and dont appear to have any bridges.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top