NU3000DSP vs EP4000
1 - 2 of 2 Posts
Joined
·
9,190 Posts
Not sure why you’re considering the 3000DSP if you don’t need DSP, but of the two I think the EP4000 is a better amp, power-wise (I have no idea what "speaker control" is). It’s been shown that Behringer is inflating the power ratings of the NU series.
http://www.hometheatershack.com/forums/home-theater-receivers-processors-amps/158593-behringer-inuke-nu1000-amp-dyno-test.html
Regards,
Wayne A. Pflughaupt
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Fi car audio ht3 amp?
Subwoofer Amps | High Pass FiltersI'm looking to build 2 sealed enclosures with the Fi audio HT3. About 6^3 foot boxes haven't decided on which ohms to go with yet 2 or 4. Having a hard time finding an amp to run these. I'm in Canada. 90%movies 10%music Was looking at a crown but a lot of people say they are terrible for subs...- 0
- 443
-
Clean Box Pro newbie issue
Subwoofer Amps | High Pass FiltersPlease be gentle as I am not a sound guy. I do photography and video. Shooting video at a pageant and wanted to connect to the sound board using the Clean Box Pro. We are connecting 1 XLR unbalanced line in to the CBP from the snake from the soundboard and then tried both the 1/8" to 1/8" on the...- 1
- 257
-
Powering sealed JL 13w7 EP2500 or XLS 2502
Subwoofer Amps | High Pass FiltersSo I plan on building a sealed JL 13w7 with EQ to hit 20hz flat, to power that little beast I was wondering if I should get an Behringer EP2500 or a Crown XLS 2502. Personally I'd like to go with the Crown, better efficiency + no need of mods for silence, but I wonder if it can handle the task...- 11
- 2K
-
upking · updated
-
Lab gruppen ipd 2400
Subwoofer Amps | High Pass FiltersHas anybody any experience with the ipd2400, particularly with subwoofers? It states 2 x 1200w @ 4ohms and I think I read response down to 2hz. I’d like to know will it perform as well as an inuke6000 as I know behringer specs are inflated. And are the fans quiet? Thanks Matt- 0
- 478
-
Behringer iNUKE1000DSP Interconnect cable
Subwoofer Amps | High Pass FiltersHi, I would much appreciate to confirm what is the proper interconnect cable for the Behringer iNUKE 1000DSP? Currently I am using the following XLR to RCA cable...- 4
- 705
-
mtavares · updated
Join now to ask and comment!