Home Theater Forum and Systems banner
1 - 2 of 2 Posts

·
Banned
Joined
·
22,577 Posts
If you are using our correction calibration file for your RS SPL meter from the Downloads Page, then it should be fairly accurate from 15-200Hz. What is not accurate is the "After" you are seeing with the SVS graph... that is only what that system is telling you it should be, not what it actually is. You need REW to tell you what the before and after is to be more accurate.
 

·
Banned
Joined
·
22,577 Posts
It does not appear to me that you have any serious nulls, no. The response looks pretty good.

I do think you are a bit aggressive on that filter around 22Hz... it appears to be too narrow and/or too much cut. If raising it increases the areas around it, then try increasing the bandwidth.

I am going to move your thread over to the REW Forum for more professional help... :bigsmile:


EDIT: Okay... maybe the EQ1 is a bit aggressive... I quickly forgot you were not using the BFD. :duh: The professional help for the SVS Sub-EQ is in the SVSound forum. :whistling: I will move it back!
 
1 - 2 of 2 Posts
Top