[SmokeyJohn102]

So i just replaced my convergence chips and now my sound isnt working any ideas? also my model is a 50H82 and im looking at the circuit bored and it looks like there is one input for a cable that has no cable 5 prong input( that i can see) is this normal (for all 50H82 owners)? thanks

 

[tonyvdb]

Sounds to me like you may have forgot to properly plug in something after you had it apart. Make sure all connections between boards are properly attached.

 

[lcaillo]

So i just replaced my convergence chips and now my sound isnt working any ideas? also my model is a 50H82 and im looking at the circuit bored and it looks like there is one input for a cable that has no cable 5 prong input( that i can see) is this normal (for all 50H82 owners)? thanks

You might post the location number and any labels on that connector if you want someone to give you information that is that specific. The speaker outputs are on a 4 pin connector IIRC. Trace the wires from the speakers and verify that they go to the correct connector.

 

[TravisS]

Hey SmokeyJohn102 did you fix this? What was the prob? What chips did you install. I have the same model tv. doing convergence chips now. See my thread at http://www.hometheatershack.com/for...-tac-0263-now-convergence-not-adjustable.html. Thanks.