Home Theater Forum and Systems banner

1 - 1 of 1 Posts

·
Registered
Joined
·
60 Posts
Discussion Starter #1 (Edited)


Under Construction





Panasonic
LCDs/CRTs/RPTVs






  • Hold down the {VOL -} button ON THE TV.
  • Press the {RECALL} button 3 times on the remote.
  • The Service Menu will be displayed.

  • Use {1} {2} on remote to navigate main menu items.
  • Use {3} {4} on remote to navigate sub-menu items.
  • Use {VOL+} {VOL -} on remote to change item value.

  • Power off to exit service mode and save.


==================================================



  • Using the remote control:
  • Press the {MENU} button.
  • Set "Antenna A" to "Cable".
  • Select "Timer" menu and set sleep timer to 30 min.
  • Press {OK} twice to exit menus.
  • Tune to channel 124.
  • Press and hold {VOL -} button ON THE TV.

    "CHK" appears in on top-left corner followed by 5 letter/numbers
    (which are the cumulative hours in hex numbers)

  • While the "CHK" is displayed, press the {OK} & {VOL+} buttons
    ON THE TV simultaneously to toggle between Modes:

    — Red "CHK" for Serviceman — Yellow "CHK" for Aging —

  • Press the {POWER} button on the remote to select one of the six
    Serviceman Adjustments Modes.

    A. MTS ADJUSTMENT
    B. CLOCK ADJUSTMENT
    C. VIDEO ADJUSTMENT
    D. HDEF ADJUSTMENT
    E. VDEF ADJUSTMENT
    F. DAF ADJUSTMENT
    G. OTHER ADJUSTMENT

  • Press {CH+} {CH -} on the remote to select the settings
    on each of Service Adjustment Modes.

  • Press {VOL+} {VOL -} on the remote to change values.
  • Press the {POWER} button on the TV to exit the service menu.


==================================================



  • Using the remote control:
  • Press the {MENU} button.
  • Press "Setup" menu.
  • On "Mode" menu, select "Cable"
  • Select "Timer" menu and set sleep timer to 30 min.
  • Press {ACTION} twice to exit menus.
  • Tune to channel 124.
  • Press and hold {VOL -} button ON THE TV.

    "CHK" appears in on top-left corner followed by 5 letter/numbers
    (which are the cumulative hours in hex numbers)

  • While the "CHK" is displayed, press the {ACTION} & {VOL+} buttons
    ON THE TV simultaneously to toggle between Modes:

    — Red "CHK" for Serviceman — Yellow "CHK" for Aging —

  • Press the {POWER} button on the remote to select one of the six
    Serviceman Adjustments Modes.

    A. MTS ADJUSTMENT
    B. CLOCK ADJUSTMENT
    C. VIDEO ADJUSTMENT
    D. HDEF ADJUSTMENT
    E. VDEF ADJUSTMENT
    F. DAF ADJUSTMENT
    G. OTHER ADJUSTMENT

  • Press {CH+} {CH -} on the remote to select the settings
    on each of Service Adjustment Modes.

  • Press {VOL+} {VOL -} on the remote to change values.
  • Press the {POWER} button on the TV to exit the service menu.






Panasonic
Projectors





  • Turn the Projector on.
  • Press the {POWER} button.
  • Then press {RIGHT} {UP} {DOWN} {UP} {DOWN}
    & {ENTER} buttons.

  • The Service Menu will be displayed.
  • To exit, turn the Projector Off.


==================================================



  • Turn the Projector on.
  • Press the {POWER} button.
  • A "Power Off" confirmation will come up on screen.
  • Then press {LEFT} {UP} {DOWN} {UP} {DOWN}
    & {ENTER} buttons.

  • The Service Menu will be displayed.
  • To exit, turn the Projector Off.


==================================================



  • Press the {MENU} button.
  • Go to "Options" menu.
  • Select "OSD".
  • Then press and hold the {ENTER} button,
    until the Service Menu is displayed.

  • Press the {MENU} button to exit.






 
1 - 1 of 1 Posts
Top