Home Theater Forum and Systems banner

PB2000 graph!, MiniDSP(help)

3649 Views 22 Replies 5 Participants Last post by  Bear123
Here is an in room graph of my single PB2000. 2525 cu. ft. room with two 5' openings, doorway, stairwell:

No EQ, no smoothing:
Second Graph: MiniDSP, no smoothing:


See less See more
1 - 3 of 23 Posts
It looks loud in your measurement with the minidsp active, are you really running the sweep at 100dB or are you not SPL calibrated?
The UMIK is a calibrated mic, so as long as you are loading the calibration file into REW then REW is showing you accurate dB SPL! What exactly is the problem you are having?
Yep, no need to manually calibrate. Simply load the cal file.
1 - 3 of 23 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.