Home Theater Forum and Systems banner
1 - 4 of 4 Posts

·
Elite Shackster
Joined
·
1,506 Posts
Hey dlark, Welcome to the Shack!

I'm not as well versed at REW as some. Reversing the phase on just one of your speakers would hurt your imaging and is not a great idea. You could reverse the phase on both speakers or on the sub and see what that does. Take a few readings with REW in each config and see what they look like. Chances are that moving the sub little bit could solve your problem.
 

·
Elite Shackster
Joined
·
1,506 Posts
I think he's thinking it's the phase between the bookshelves and the sub at the crossover point that is over reinforcing those frequencies so by changing the phase on the sub he could intentionally cancel some of that out.:scratch:

dlark - have you tried anyting with REW?
 
1 - 4 of 4 Posts
Top