Home Theater Forum and Systems banner

1 - 13 of 13 Posts

·
Registered
Joined
·
746 Posts
It has been received well by users.
I never personally owned one.
It was tested at ~900w/RMS.
If you need a plate amp this is a good one to get.
Another good one with less power but more features is the O-audio BASH 500.(tested at ~440W/RMS)
Another option is a pro amp like a Behringer EP2500.
 

·
Registered
Joined
·
746 Posts
The PE rack mount 1000w did very poorly, like ~550W.
I'd expect the same lack of performance from the 500w one.

The O-audio has a PEQ and a SSF, both very nice...the PE one does not have either.
The Oaudio 500 was tested at a very respectable 440w...the PE bash 500 was not tested.
 

·
Registered
Joined
·
746 Posts
No, it wasn't part of that big test....but it was independently tested.
It was stated that it was basically the same as the Keiga....this person bought the 1300 for this test as many believed they were just rebadged Keiga's which have been tested before @ ~800-850w.

Edited for poor gramma after going back and reading.
 

·
Registered
Joined
·
203 Posts
I think ED admits they are rebadged Keiga amps. Maybe I'm confused though :) I will say my LT/550 has a made in China sticker on it.
 

·
Registered
Joined
·
36 Posts
Discussion Starter #12
thanks guys, i decided to buy the oaudio bash 500 from bruzzi off this site. save a little and get a pretty good amp.
 

·
Registered
Joined
·
25 Posts
I have an LT/1300, I am currently using it to power the bass woofers on my B&W N803 through a BFD.

I had it hooked to my SDX-15, got lots of videos of it.
Every video I made on youtube since July 15th has it powering something...

watch?v=SoeNUZ-4Qi0
watch?v=jqAkCS0Umn4
watch?v=nbhoNsW0xhk
watch?v=NXDa7-DS80Q
watch?v=6kuGd7BRjbc
watch?v=ZSMPcdGIMLE

I plan on buying another 4 of them because they are cheap and don't make any fan sounds.
 
1 - 13 of 13 Posts
Top