Home Theater Forum and Systems banner

1 - 17 of 17 Posts

·
Registered
Joined
·
25 Posts
Discussion Starter #1
im only at the check levels stage and im not hearing any test signal thats supposed to be generated by rew. I have the output of the spl meter connected into the input of the soundcard. and the output of the sound card connected to the V.AUX input on the front of my avr. Im not hearing any test tones.
 

·
Registered
Joined
·
25 Posts
Discussion Starter #2
thanks for all the help. i can faintly hear a pink noise when from a speaker but nothing from the subwoofer, which is all i want to test.
 

·
Registered
Joined
·
7,514 Posts
Have you successfully performed the soundcard calibration routine and created the soundcard calibration file?

brucek
 

·
Registered
Joined
·
25 Posts
Discussion Starter #8
im making headway. I got noise to come out at high volumes!! i had to recalibrate the sound card. Now i just want to measure the sub and i have it selected as such in 'making measurements' but i still hear lfe coming from one of my speakers. normal?
 

·
Registered
Joined
·
25 Posts
Discussion Starter #10
my level is too low it says -78. but when I go to check my levels my meter on the right reads -18 and the output is at -12. the meter that reads left doesnt budge from the bottom nomatter what i do
 
1 - 17 of 17 Posts
Top