Problems with Input and Ouput SB Live

2279 Views 15 Replies 4 Participants Last post by kbgl, Jan 14, 2008

G

Discussion Starter · Jan 13, 2008 (Edited)

I have an internal SBLive card. It's the only sound card in the computer.

When I try to calibrate my card, I get a message " SPL Meter Audio Input Not Available".

On the REW setting page, I set the input and output as default, and I also tried other settings, but nothing seems to work. All I can seem to get is error messages.

1 - 16 of 16 Posts

brucek

· #2 · Jan 13, 2008

Did you look through this thread ? I know it's for the external card, but the application data is the same......

Does REW recognize the card in the Settings page for selection as Input and Output?

Tell me about the loopback cable you're using for the soundcard calibration?

Can you post a picture of your Windows Playback and Record mixers?

brucek

G

Discussion Starter · #3 · Jan 13, 2008

I looked through that thread and a few others briefly, but the problem is different I think.

Does REW recognize the card in the Settings page for selection as Input and Output?

The setting page shows the card in the drop down boxes along with Default and java. If I select the SB card for the output, it gives me an "output device error". If I select the SB card for the input, it gives me an "input device error". The drop down boxes under both are grayed out.

Tell me about the loopback cable you're using for the soundcard calibration?

I don't think the loop back cable is the problem. I get the same messages without the cables,

Can you post a picture of your Windows Playback and Record mixers?

How do I copy the screen?

See less See more

Wayne A. Pflughaupt

· #4 · Jan 13, 2008

Hit “Control” and “Print Screen” simultaneously, then paste into Paint. Save to a file, then edit as needed in whatever picture editing program you have. Typically the picture has to be shrunk down to 800 x 800 or less in order to upload here (see here for details on that). Or, you can upload it to your own server and post the link, or put the link in image tags to show it on your post.

Regards,
Wayne

G

Discussion Starter · #5 · Jan 13, 2008

Here's one.

See less See more

G

Discussion Starter · #6 · Jan 13, 2008

This is what I get when I start REW. After I click OK, I get the same message for input.

See less See more

brucek

· #7 · Jan 13, 2008

Your card isn't being recognized by REW for some reason.

You should be able to control the card with Windows though.

Select DEFAULT for both Input and Output and use the Windows mixers to control the setup levels and see how that goes.

Below are the Windows Playback and Record settings from my system.

It shows the two mixers and their interaction with REW. See how that goes...

PLAYBACK MIXER

Text Green Line Font Screenshot

RECORD MIXER

Text Blue Line Font Screenshot

REW MIXER

Text Blue Line Font Software

brucek

See less See more

3

JohnM

· #8 · Jan 13, 2008

Try selecting 48kHz and check that the SB Live is configured to use 48kHz and 16 bits in the Creative Device Control panel. Which version of Windows are you running?

G

Discussion Starter · #9 · Jan 13, 2008

From the control panel.

See less See more

G

Discussion Starter · #10 · Jan 13, 2008

I'm using w98 with an upgrade to milenium. Is this the right java version?

See less See more

G

Discussion Starter · #11 · Jan 13, 2008

Here's my control panel. I can't find a mixer like yours Bruce.

See less See more

brucek

· #12 · Jan 13, 2008

Double click the little speaker in your system tray to reveal the Playback Mixer.

Select options / properties to switch between Playback and Record Mixer......

Text Line Product Font Technology

Latest JAVA

Text Blue Font Line Screenshot

brucek

See less See more

2

JohnM

· #13 · Jan 13, 2008

Sounds like a driver issue. JavaSound requires DirectSound drivers, which are part of DirectX. You could try updating DirectX on the PC (see http://support.microsoft.com/default.aspx?scid=fh;DE;drxint) but there may be problems with the driver models used on Windows 98 & ME, which differ from Windows 2000/XP etc.

G

Discussion Starter · #14 · Jan 14, 2008

I tried a second sound card, but had no luck with it either. I have another computer with XP on it. I think I'll start over with it.

Thanks for the help!

brent_s

· #15 · Jan 14, 2008

kbgl said:
From the control panel.

What other values are in the drop downs? I would think you would want your default playback device to be 'speakers" and your recording device to be "line in/mic in"...not Wave Out/In for both. At least that's how it works with the Live! External.

-Brent

G

Discussion Starter · #16 · Jan 14, 2008

That's the only option in the drop downs.

1 - 16 of 16 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.