Home Theater Forum and Systems banner
1 - 2 of 2 Posts

·
Registered
Joined
·
91 Posts
You don't really need a service manual for convergence repair unless you need adjustment in service mode. But you can start without service manual.

You can take the back cover off and check what chips are in your TV. I worked on a panasonic before and it uses two STK392-110s. STK392-150 should be a safe bet for direct substitute.

As to the six low ohm resistors, you can found them around the STK chips and read the values by color bands on the resistor, unless the resistor is fried too much that it's brown and discolored. But chance is there that these six resistors are of the same resistance like 2.2ohm(color bands: red red gold).
 

·
Registered
Joined
·
91 Posts
Master lcaillo, I meant begin with no service manual while looking for it if needed later, :)

Someone posted a link to a service manual here in fixya and it's still available now. It's a different model but the adjustment part could be the same.
http://webgraphx.com/panny/
 
1 - 2 of 2 Posts
Top