Home Theater Forum and Systems banner

Pyle PT260A mysteriously stopped working

1901 Views 4 Replies 2 Participants Last post by  Kyle_1988
Hello everyone, I'm hoping I can get some help here.

My home theater system has worked just fine for the last 4 years. I have a Pyle Pro PT260A audio receiver hooked up to a DVD player, a CD player, and some speakers. Just yesterday we sat down to watch a movie and no sound would come out. We checked all the connections and everything was still plugged in. We tried turning everything on and off. We tried muting and unmuting it. We tried switching between channels. We tried all the buttons. We tried the CD player too and still got no sound, so we know the problem isn't the DVD player. Is there any reason the sound would suddenly stop working, and is there anything we can do about it?

Thank you in advance for your help!
1 - 5 of 5 Posts
Unfortunately these kinds of problems are usually the receiver kicking the bucket. Have you tried pulling the power on it and letting it sit for a day or so and then plug back in?
Pyle is not known for quality stuff and your lucky you got 4 years out of it.
So it should sit while unplugged? I didn't think it made a difference if it was turned off, but I'll try that. Thanks!
It may if for some reason it has gotten something messed up in its logic. You may want to google "Pyle PT260a reset" and see if anything comes up.
Thanks, but I didn't find anything about resetting it.
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.