Home Theater Forum and Systems banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1,060 Posts
From the Polk PSW10 manual:

PSW10—
NOTE: The PSW10 subwoofer does not have an LFE input. Instead, use either the
L or R Line input (another hookup option is to use a Y-split cable and connect both
L and R Line inputs). After you make this Sub Out connection, turn the "Low Pass"
filter fully clockwise. This will in effect create an LFE input.
 

·
Registered
Joined
·
1,060 Posts
Yes, the sub just sums those two inputs anyways. So, if your receiver has already summed the subwoofer output just plug into either the left or right and turn the crossover to its highest point.
 
1 - 2 of 2 Posts
Top