Home Theater Forum and Systems banner
1 - 5 of 5 Posts

·
Premium Member
Joined
·
8,112 Posts
Hello,
Something like the Onkyo TX-NR609 would do quite well and is available for a very reasonable price. I would however go one Series up to the 709 as it adds Audyssey MultEQ XT (609 only uses 2EQ)and Preamp Outputs.
As for the Subwoofer, the Dayton Sub120 is the best value I can think of in that price range and it really is an insane value.
Cheers,
JJ
 

·
Premium Member
Joined
·
8,112 Posts
Is it possible to spend less on the receiver without too much degradation of quality?
What about the Harman Kardon HK 3490?
Also, I can build car subwoofers pretty well, could i possibly save some money and build my own / is there any way to get a power source/crossover plate anywhere?

Thanks
You can get a 609 for around $320 from Accessories4less and it is truly a stellar value. As for a Car Subwoofer, I would not go that way. You might want to check out our DIY Subforum for Home Subwoofer Kits as I think it will provide a much more HT orientated Subwoofer. Also, the Dayton is amazing for the price and worth checking out.
 

·
Premium Member
Joined
·
8,112 Posts
Thanks for the tips JJ,

I know walmart anything isn't always the best choice, but whats the feeling about this?

Walmart ID number #0088493813304
Pioneer 5.1-Channel A/V Receiver featuring HDMI Connectivity
(won't let me post links yet)

I think I'm lured in by the 110w/channel
Especially with Entry Level AVR's, the rated specs are often a complete and utter joke. Especially when measured into 5 and 7 Channels. This is why I am so fond of the Onkyo.

Here are the Onkyo's Bench Test: "HT Labs Measures
Five channels driven continuously into 8-ohm loads:
0.1% distortion at 81.0 watts
1% distortion at 95.1 watts

Seven channels driven continuously into 8-ohm loads:
0.1% distortion at 77.7 watts
1% distortion at 88.9 watts"

For comparisons sake, this is from a Review of an $900 Yamaha AVR from the same Magazine:
"Five channels driven continuously into 8-ohm loads:
0.1% distortion at 60.5 watts
1% distortion at 73.3 watts

Seven channels driven continuously into 8-ohm loads:
0.1% distortion at 34.7 watts
1% distortion at 44.3 watts"

And with Yamaha, they are usually much more difficult to find On Sale. Truth be told, the Yamaha is far more the rule than the exception. It is what really makes the Onkyos special.
 

·
Premium Member
Joined
·
8,112 Posts
onkyo sounds like the way to go.

There is a big price cut with the TX-NR509 or the TX-8050/8555..

Do you think that sound quality/ overall quality suffers that much from going through one of these routes?

Thanks in advance!
Hello,
The 509 is a far weaker Amplifier Stage primarily due to not having to attain THX Certification. While I understand wanting to spend the least amount possible, for $320, the 609 is without question the way to go. Huge dropoff with the 509.
J
 

·
Premium Member
Joined
·
8,112 Posts
also a buddy of mine is trying to get rid of a Pioneer Elite VSX-84TXSi for 295$. Its in mint condition, all cables/manuals/remotes included + firmware update. This would be the better bet wouldn't it?
It is fairly old. It did retail for around $1500. However, it is pre HDMI 1.3. This is the HDMI Spec that would be the oldest I would want. Moreover, you would have a Warranty with the Onkyo and the true power will be close if not bettered by the Onkyo. The Onkyo uses the Marvell Qdeo Video Processor which is way better than the Faroudja DCDi Video Processor in the 84. And finally, I think Audyssey is far superior to MCACC and the 84 is not a Networked AVR.
 
1 - 5 of 5 Posts
Top