[Sonnie]

Re: Reckhorn b1 and b2 differences?

On the B1 I think the blue would be equivalent to about a 2nd order 15Hz HPF.

Red = Sound Card
Gold = 10Hz HPF
Blue = 10Hz HPF with 20Hz boost

On the B2 I am thinking it is closer to about a 12Hz HPF.

Red = Sound Card
Blue = 10Hz HPF setting
Green = 10Hz HPF setting with 20Hz boost (12 o'clock)

I am using the B2 right now in my setup.

 

[Sonnie]

Re: Reckhorn b1 and b2 differences?

What... did I goof up something again... :rolleyesno: I never cease to amaze myself.

Yes, it does have a gain adjustment on it and it works well. I use it from my Onkyo 876 to the four EP2500's I have. No significant issues of any kind thus far... and the only minor one is the HPF only reaching the 12Hz or so area... not 10Hz, but again I consider that minor. It does better than any other HPF I have used, which is about all of them.

 

[Sonnie]

I am not quite sure I follow your question, but you do not need a splitter for the Reckhorn unless you plan on feeding two amps, in which case you could split from your sub pre-out to either Reckhorn or from the output of the Reckhorn to your amps.

If there is a question about hooking up your Onkyo and Rotel, you might want to ask that over in System Setup and Connection. :T