Replacement for Reckhorn B-2 active bass extension & subsonic
Join the discussion
Recommended Reading
-
help needed making enclosure for JBL W15GTI MKi
Ported Subwoofer Build ProjectsHello . some one can help me making ported enclosure for JBL W15GTI MKi keeping qtc .707 in mind i want to use it in my HT . room size i 18x24x11 i want to go for slot port rather then round port im posting t/s parameters- 8
- 719
-
zeeshan tariq · updated
-
HT box size and port for a JBL MKII 15" ?
Ported Subwoofer Build ProjectsI'm looking for specs to build a large ported enclosure for a Home theater application. I'll be running (1) JBL MKII 15" subwoofer with the coils in parallel for a 3 ohm load for a Crown K2 amp. So might be around 1500 watts RMS? (If this isn't enough bass I might use a second 15" in an...- 11
- 3K
-
probillygun · updated
-
Need help with LLT please...
Ported Subwoofer Build ProjectsI would like to build the LLT. I will be using the Ultimax 15" DVC. Also have (4) 4" x 18" flared ports to use if necessary. The enclosure will be behind the couch so it will have to be narrow 18"/20" but up to 30/32" tall and 50/60" long. Recommendations for speaker/port location would be...- 3
- 969
-
HT-EXT · updated
-
15" vented end tables!
Ported Subwoofer Build ProjectsI should have taken more pictures of this build, but I did most of the assembly in a hurry one night after the rest of the family was in bed. Anyway, I had a full marty with a Dayton classic 15 that sounded amazing but I was suffering from massive room gain in one corner and the inability to...- 5
- 2K
-
Need help with DIY sub build
Ported Subwoofer Build ProjectsGot a Dayton ultimax um 1822 need help with box design- 11
- 3K
Join now to ask and comment!