[Troy P Dorey]

Hi All
Just wondering, if for the Measurement mic in REW, if I can use the Anthem mic I had with the Anthem ARC program.
I no longer have the receiver, however I can buy the Mic and stand and Calibration files for about half the cost of a UMIK-1

 

[Lumen]

As far as I can tell, the ARC mic does come with a calibration file but it's proprietary and not compatible with REW.
The following post from 2015 in this thread describes the issue:

The calibration file supplied with ARC M1 looks like a dBase file (file extension should be .dbf). There's tools to open this kind of files, it is quite common database file format. Unfortunately (or naturally) the file is password protected. So, getting to calibration data is not possible for Average Joe.

You may want to contact Anthem's tech support to confirm the cal file's format before ordering.

 

[Troy P Dorey]

Thanks for your Help
looks like I don't get a new Golf Wedge lol

 

[Lumen]

You are most welcome, and glad to have you aboard here at HTS!

 

[Troy P Dorey]

Thanks
yeh wasn't sure if in the past couple years since that post, REW may have upgraded. It does show up on preferences in REW.