Home Theater Forum and Systems banner
1 - 4 of 4 Posts
G

·
Discussion Starter · #1 ·
When I start REW with my Tascam US-122 plugged in, I get the following error:

No input mixers available
supporting PCM_SIGNED 48000.0 Hz, 16 bit, stereo, 4 bytes/frame, little-endian

If I click OK the program opens, but when I go to settings and look at input devices for 44.1kHz, I see four items in the pull-down list:
Default Device
MacOSX, Core...
blank
blank

("blank" means a blank line). Presumably the Tascam should be in one or both of the blank lines. Selecting the upper blank gives a javascript error or sometimes a crash; the lower one causes a crash.

This is a Macbook Pro running OSX 10.4.11. I've got the latest drivers for the Tascam.
 

·
Premium Member
Joined
·
6,711 Posts
Under 10.4 you need to set the sampling rate as 44.1kHz and select the default input and output. Only the on-board audio input is available to java apps like REW, you need 10.5 to get Apple's fix for that.
 
G

·
Discussion Starter · #4 ·
Under 10.4 you need to set the sampling rate as 44.1kHz and select the default input and output. Only the on-board audio input is available to java apps like REW, you need 10.5 to get Apple's fix for that.
OK - I'll work around it. Thanks.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top