Home Theater Forum and Systems banner
1 - 9 of 9 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter · #1 ·
Good day

I've been studying and watching a lot of Videos and resources online regarding the setup/calibration of REW.

I am running Mac OS 10.8.3 with REW v5.12

Under Preferences one can set the Input/Output device. I am unable to select/see which input/output to use for the calibration test, which makes it nearly impossible to know which input/output to use.

Any advice perhaps?
 

·
Registered
Joined
·
225 Posts
You have "Default" selected? That would mean you need to open the OS X System Preferences and go to the Sound pane and make sure your device is selected there.
 

·
Premium Member
Joined
·
6,711 Posts
If it isn't working with the MOTU selected as both the output device and output and input device and input could try leaving all the fields set as default. Is the output working OK?
 

·
Registered
Joined
·
13 Posts
Discussion Starter · #9 ·
Seems like I have found the solution. I have a unit that supports multiple inputs/outputs. I changed the default in and outs to 1 and 2 and looped output 1 to input 1. I am now receiving signal.
 
1 - 9 of 9 Posts
Top