Samson XP360B - Speaker replacement | Home Theater Forum and Systems

1 - 1 of 1 Posts

lean032

Registered

Joined Jul 24, 2018

1 Posts

Discussion Starter • #1 • Jul 24, 2018

Hi everyone!!!

I own a Samson Expedition Express XP360B

I would like to replace the tweeter but I can´t figure out how to remove the front panel to access to the speakers.

Can anybody help me with this???

Thanks a lot!!!

LF

1 - 1 of 1 Posts

Recommended Reading

Yamaha RX-V630 intermittently shutting down

DIY Repair and Maintenance

Hi everyone. I have a Yamaha RX-V630 that I've used for nearly 20 years now without any problems. However, within the past few weeks, that's changed: The unit started shutting off on it's own. For the past 10 years, the receiver has been getting its audio signal from my computer via RCA...
- 2
- 294
- F
  fosgate3 · updated 7 d ago
Yamaha RX-V667 PS2 fault

DIY Repair and Maintenance

Hi all, I am having trouble repairing my Yamaha RX-V667. It initially shut down due to an over current fault which turned out to be a short on a channel (blown transistors etc) and would not go into self diagnostic mode. I repaired the channel and now it turns on for 1 second and turns off. I...
- 10
- 4K
- F
  Fity · updated 1 mo ago
repairing Benq HT1075

DIY Repair and Maintenance

After about 4 years of usage, the Bulb inside my Benq HT1075 exploded and I had to fully disasemble the unit to get rid of the glass shards and cleanup for any accumulated dust at the same time. I did took to time to put a number on each individual screws to put it back together and I also used...
- 0
- 92
- Patenteux · updated 1 mo ago
How to test interconnects and speaker wire

DIY Repair and Maintenance

I am using known brand RCA and Balanced interconnects between components (CD player - Preamp - amplifier - speakers) and banana connects for speaker wire from amplifier to speaker. Recently an amplifier blew a 5 amp fuse within the amplifier. Can someone directly to a step by step procedure to...
- 3
- 450
- J
  Joe11554 · updated 2 mo ago
How to connect RCA 5.1 surround sound to receiver?

DIY Repair and Maintenance

My receiver has settings specifically for Dolby 5.1 surround send. It’s old (but still strong!) and only has RCA inputs (no HDMI or Optical). I’ve included an image of the back. I’m having trouble understanding how to feed it the surround sound information with the plugins on the back. The goal...
- 5
- 899
- mynameislewey · updated 4 mo ago