Home Theater Forum and Systems banner

1 - 4 of 4 Posts

·
Registered
Joined
·
346 Posts
Discussion Starter #1 (Edited)
I figured I would start a new thred for my house curve and hard knee curve (attempted) :huh:

I re-ran all my tests and re-calculated/manual set 5 filters, I tried 3 and I wasn't happy with the results so I added two "push" filters.

Here is what I started with, no filters:
View attachment 13006

Filters added
View attachment 13007

Corrected results
View attachment 13008

Next I will find my house curve :neener:
 

·
Registered
Joined
·
346 Posts
Discussion Starter #2
Ok Wayne now what do I do, I am suppose to set the tone generator to my cross over freq of 80hz play a tone, then change to 32 and play a tone, but clearly the 32 sounds louder than the 80 does and in fact db wise there is a 2 db difference. :hissyfit:
 
1 - 4 of 4 Posts
Top