[lglura]

SoundSplinter RL-P15 sonosub build

Ok guys, received my second unit friday, and i`m ready to build two sonosubs. If anyone like to see my build i`ll post pictures:newspaper:

 

[atledreier]

Re: SonoSplinter RL-P15 build

Yes please! Been ages since the last SS build!

 

[Mike P.]

Re: SonoSplinter RL-P15 build

I agree. Lots of build pics please!

 

[lglura]

Re: SonoSplinter RL-P15 build

Ok, can`t resist your begging
Here is my workshop, and as a famous norwegian cook says "i have done some preparation".

 

[atledreier]

Re: SonoSplinter RL-P15 build

7 layers for each tube... WHat's your plan? Brace for the port? Triple top, quad bottom?

DIY satellites as well?

 

[Bent]

Re: SonoSplinter RL-P15 build

likely doubled base plates, doubled driver baffle and trippled top plates to help support the port tubes.
(just a guess).

 

[lglura]

Re: SonoSplinter RL-P15 build

My plans are changing all the time:mooooh:, triple bottom and top, and yes i`ve decide to brace the port. The encloseres you see on the left is my diy satelites.

 

[lglura]

Re: SonoSplinter RL-P15 build

Need some help.
How large do i need to make the flares. The ports are 6"x 30". I`ve planned to make
"donutflares"

 

[atledreier]

Re: SonoSplinter RL-P15 build

Get your largest roundover bit..... That's your size...

Seriously, I have 6" ports and a 1/2" roundover, and no chuffing.

 

[lglura]

Re: SonoSplinter RL-P15 build

Get your largest roundover bit..... That's your size...

Seriously, I have 6" ports and a 1/2" roundover, and no chuffing.

My largest routercutter is 30mm, but then the donut is going to be 60mm diameter, and thats large.
Have also a 15 mm cutter and if you dont have any chuffing thats the size i`m going to use.

 

[atledreier]

Re: SonoSplinter RL-P15 build

You'll love them!

Beware though. Mine are jumping a bit on the floor at insane levels. I've been told it's because I have no baseplate. Maybe you should consider that in your design.

 

[Rodny Alvarez]

Re: SonoSplinter RL-P15 build

looking good!!

More pics please:bigsmile:
I ordered a 1 1/2 round-over bit for my flares it was about $35.

 

[lglura]

Re: SonoSplinter RL-P15 build

You'll love them!

Beware though. Mine are jumping a bit on the floor at insane levels. I've been told it's because I have no baseplate. Maybe you should consider that in your design.

Thanks Atle. i`ll deal with that problem when it happens.

 

[lglura]

Re: SonoSplinter RL-P15 build

looking good!!

More pics please:bigsmile:
I ordered a 1 1/2 round-over bit for my flares it was about $35.

Thanks Rodny. Have seen your homepage, very impressiv.
More pics is comming up soon.

 

[lglura]

Re: SonoSplinter RL-P15 build

The donut is served

 

[atledreier]

Re: SonoSplinter RL-P15 build

Needs some icing..

 

[lglura]

The port is ready to be glued in the tube

 

[atledreier]

Looks awesome!

 

[slim2fattycake]

that looks awesome. more pictures! hehe.

 

[Bent]

I think I am jealous of your abilities.
great job.