Home Theater Forum and Systems banner
1 - 2 of 9 Posts

· Registered
Joined
·
3,249 Posts
I
I also have hooked up two Cerwin Vega 3 way speakers with 12" woofers underneath the TV. Finally I installed two 6" JA flush mounted ceiling speakers in the back.
Problem is, I am not able to balance the sound. Even with the back ceiling speakers up to the maximum volume, I'm not getting much from them. Any suggestion? Thanks in advance. Ace
How are you balancing the sound???? ...if you're doing it by ear, I think you have the fronts to high and they're overpowering the ceiling speakers.

Do you have an SPL meter??? ...:huh:
 

· Registered
Joined
·
3,249 Posts
I am using the test on the receiver. I have the ceiling speakers up all the way. Ace
Are you using an SPL meter??? ...if not, I suggest you to get one (here is a link http://www.radioshack.com/product/index.jsp?productId=2103667), this is more accurate than our ears :bigsmile:.

Looking at the specifications, I noticed that your AVR doesn't have auto-calibration, Right??? ...Did you adjusted the distance of every speaker??? ...What about the size??? (is better to have everything set to small)....What crossover frequency are you suing??? (THX recommends 80Hz) ....even if your speakers are all the way up in the ceiling, your AVR should be able to compensate for that :yes:...
 
1 - 2 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top