Home Theater Forum and Systems banner
1 - 1 of 1 Posts

·
Registered
Joined
·
5,772 Posts
Subs usually crossover at around 80 Hz so you need one that will go to about double that to get a smooth transition between it and the mains. So 20 - 150 Hz is quite acceptable.

You would only need to go higher, ie 250 Hz, if you had very small mains that only went down to 120 Hz.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top