Home Theater Forum and Systems banner
1 - 2 of 2 Posts

· Registered
1 Posts
Discussion Starter · #1 ·
hi everyone i purchased a used toshiba set i plugged it in and turned on the power red light comes on but, thats all when i opened it up it looks to have had water damage on the pd0639 board it is the board adjacent to the power board most chips and components have a white haze on the leads. Is this possible to ressurrect i am an advanced solderist, wondering if this is possible or replace the whole board as that is costly. Any tips anyone has maybe from recovering from water damage or best process for cleaning boards would be muchly appreciated thanks for your time.:thud:

Also the pd0639 board has jumpers with 4 wires for each color leading to controller board on bottom of the vacuum tubes
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.