Home Theater Forum and Systems banner
1 - 3 of 3 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter · #1 ·
Well finally making head way but have just one more question about the toshiba projection set. This board is badily damaged and a semiconductor has toasted the board under itself. It appears the trace is intact! Take a look and tell me if its still viable for this application. All comments are welcomed and appreciated
 

Attachments

·
Plain ole user
Joined
·
11,121 Posts
If the traces are intact then claen them up, tin them with a layer of solder and you will be fine. If they are not you need to build connections, either with new trace material or a small lead or wire.
 

·
Registered
Joined
·
20 Posts
Discussion Starter · #3 ·
If the traces are intact then claen them up, tin them with a layer of solder and you will be fine. If they are not you need to build connections, either with new trace material or a small lead or wire.
Thanks dude thats what I did. Really just wanted to be sure if you check my othwr thread maybe you can offer some insight on that issue. Thanks again for you time and interest.
 
1 - 3 of 3 Posts
Top