[panson]

I want to use REW to measure driver's TS parameters and Basta! to do box design. Basta! requires voice coil inductance, Le (mH), filled in its Driver tab. Should I use Le(f3) generated by REW? Or Le given in Simplified Model Parameters?

Many Thanks!

 

[JohnM]

Probably Le from the simplified model.

 

[panson]

Thanks for your feedback, John!

In my cases, Le(f3) or inductance at cursor (10 k) gives me good agreement in Basta. Le loss in Basta 0.7 usually is okay. 0.53 is used for the driver.