I ran a 20 foot usb 1.1 with no problems. I don't think you will have any issues.
Matt
Matt
USB Cable Length
Me again!
I'm planning to run a USB cable from my control room to an outlet in my media room. The (perhaps embarrasing) reason for this is to link my USB microphones back to my Wii in the control room. My concern is what I've read about the length limitations of USB.
My plan is to run the USB from the Wii, 10ish feet to a wall plate. There it will hit a powered hub that will connect to the mics.
The question is how will this USB run impact the signal/power? I've read that 15ft is the maximum for USB, but the run from the Wii to hub will be shorter than that, but the mic cords will run an additional 8ft or so. Will the powered hub make a difference?
Does all of that make sense? Thanks.
I'm planning to run a USB cable from my control room to an outlet in my media room. The (perhaps embarrasing) reason for this is to link my USB microphones back to my Wii in the control room. My concern is what I've read about the length limitations of USB.
My plan is to run the USB from the Wii, 10ish feet to a wall plate. There it will hit a powered hub that will connect to the mics.
The question is how will this USB run impact the signal/power? I've read that 15ft is the maximum for USB, but the run from the Wii to hub will be shorter than that, but the mic cords will run an additional 8ft or so. Will the powered hub make a difference?
Does all of that make sense? Thanks.
1 - 6 of 6 Posts
I've done a little research on USB cables, and apparently the USB specification limits the length of a cable between full speed devices to 5 meters (a little under 16 feet 5 inches). For a low speed device the limit is 3 meters (9 feet 10 inches).
It is recommended that if you want to go longer distances, you apparently can buy hubs and use 5 meter cables serially between them.
Now of course this doesn't mean that you can't go out and buy a 20 ft cable like the guy above me... it's just what the specification says.
KM
www.myhometheatersecrets.com
It is recommended that if you want to go longer distances, you apparently can buy hubs and use 5 meter cables serially between them.
Now of course this doesn't mean that you can't go out and buy a 20 ft cable like the guy above me... it's just what the specification says.
KM
www.myhometheatersecrets.com
You could always do this....
http://www.monoprice.com/products/p...=10303&cs_id=1030304&p_id=6042&seq=1&format=2
http://www.monoprice.com/products/p...=10303&cs_id=1030304&p_id=6042&seq=1&format=2
I like that possibility, but it's only 1.1 not 2.0. I like the thought of using cat6, but I need USB 2.0.You could always do this....
http://www.monoprice.com/products/p...=10303&cs_id=1030304&p_id=6042&seq=1&format=2
The repeater cable sounds like a better option.
1 - 6 of 6 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Home Theater Forum and Systems
A forum community dedicated to home theater owners and enthusiasts. Come join the discussion about home audio/video, home theaters, troubleshooting, projects, DIY’s, product reviews and more!
Full Forum Listing
Top Contributors this Month
View All
RobKnapp
10 Replies
briannarichardson2
9 Replies
Da Wiz
7 Replies
Recommended Communities
