doesnt seem this is as big a community into IB subs anymore. i have read a lot and lot of the stuff seems dated. hope its not a mistake
vann_d's 4 x FicarIB318 build
Join the discussion
Recommended Reading
-
IB build
IB - Infinite Baffle Subwoofer Build ProjectsHi guys, I'm planning on building an IB. My movie room is 15.5W x 27L x 8H the garage (otherside of the IB) is 28W x 30L x 8H. My loose plan was to make a IB with 4 18's in the right corner where my svs PB ultras are located. I already have a ep2500 to power them. So my question is what drivers...- 0
- 117
-
Infinite Baffle Sub-woofer Question
IB - Infinite Baffle Subwoofer Build ProjectsHello, I am brand new to this and have been trying to learn about speaker building. This may seem like a dumb question, but the answer will help me understand more than I knew before :smile: Would it be possible to not have an extra room, but just have a cylinder from each woofer go out through...- 10
- 1K
-
IB318 modelling and amp power
IB - Infinite Baffle Subwoofer Build ProjectsNot sure If im modelling this correctly. This is telling me that I'd have to go up to 600W per speaker to hit Xmax. I've read in other places that 250-350w would be the most you'd want to go with dual opposed IB318 subs to prevent from bottoming out.- 1
- 261
-
Scuba's 4 Ficar IB3 18 Manifold
IB - Infinite Baffle Subwoofer Build ProjectsI have a thread on-going over at the cult, but thought I'd share the details here. Room is 14.75' Wide by 16.5' deep with 7.75' height. Theater/Room details can be seen here...- 23
- 10K
-
Glenn's IB sub,(2)Fi18's
IB - Infinite Baffle Subwoofer Build Projectshttp://www.hometheatershack.com/forums/ib-infinite-baffle-subwoofer-build-projects/48481-dayton-ib385-8-15-sound-quality.html ....(this link will take you to my thread "Dayton IB385-8 sound quality?" which is a precursor to this IB Fi18 build, it explains how I derived at these drivers)...- 33
- 11K
Join now to ask and comment!