Home Theater Forum and Systems banner

1 - 2 of 2 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter #1
I plan on going 4.00 cf gross for the pyle sub sealed this gives it a center frequency of about 35 hz and a -3 at 27 hz. We could even stuff it for an even lower center frequency and lower qtc than 1.10. The subwoofer is dual 4 ohm so we would need a amp at 200 rms at 8 ohms. Any suggestions appreciated. (This subwoofer is for my nephew not me)
 

·
Registered
Joined
·
8 Posts
Discussion Starter #2
I plan on going 4.00 cf gross for the pyle sub sealed this gives it a center frequency of about 35 hz and a -3 at 27 hz. We could even stuff it for an even lower center frequency and lower qtc than 1.10. The subwoofer is dual 4 ohm so we would need a amp at 200 rms at 8 ohms. Any suggestions appreciated. (This subwoofer is for my nephew not me)
I changed the subwoofer to a punch z rfz 2412 4 ohm 100 watt rms I have laying around. The amp will be a dayton 70 watt plate amp and the box will be 3.00 cf net ported to 27 hz with a 4 inch precision port 13.5 inches long.
 
1 - 2 of 2 Posts
Top